Sony MVS-8000X SystemMVS-7000X System - Character Trail Settings

USO RESTRITO
328
Applying Special Effects (Nonlinear Effect Settings)
Knob
Parameter
Adjustment
Setting values
1
Density
Degree to
which image
disappears
0.00 to 100.00
2
Random
Trail type and
amount of
stardust
0.00 to 100.00
Chapter
11
DME
Operations
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1 Press [Pixel], turning it on.
2 Set the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Density
Degree to
which image
disappears
0.00 to 100.00
2
Random
Degree to
which pixel
positions
become
more
randomized
further from
the center
0.00 to 100.00
Character Trail Settings
You can set the effect starting position, the degree of
expansion, the slant angle of the effect region, and trail
direction, the degree to which the image disappears, the
trail type and amount of stardust, and other parameters.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following
parameters.
Knob
Parameter
Adjustment
Setting values
1
Transition
Position where
effect starts
–8.000 to
+8.000
a)
–32.000 to
+32.000
b)
2
Expand
Degree of
expansion
0.00 to 100.00
3
Trans Angle
Angle of
slanting in
effect region
–8.000 to
+8.000
4
Trail Angle
Direction of trail
–100.00 to
+100.00
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To make the tip of the swirl stardust
1 Press [Pixel], turning it on.
2 Set the following parameters.