section is started up, listed with the most recent
information at the top.
A maximum of 1024 error status changes appear, and
when the number exceeds 1024, the oldest items disappear
from the list.
1
No
2
Date/Time
3
Device
4
Status
g
All button
When this is on, all error log items are selected. To cancel
the selection, press once again to return to the normal
display.
h
Error Popup button
This selects whether or not to display “ERROR” on the
menu title button when an error occurs. This button is
linked to [Error Popup] in the error status menu.
On: if a device error occurs, display “ERROR” on the
menu title button.
Off: if a device error occurs, do not display “ERROR” on
the menu title button.
Error Messages Appearing in a
Message Box
Corresponding to the content of the message, an icon
appears.
Icon
Title
8
Error Popup
7
All button
6
Plural button
5
Clear button
button
a
No
This is a sequential number assigned to the items in the
error log.
b
Date/Time
This shows the date and time the status change occurred.
c
Device
This shows the device on which the status change
occurred.
d
Status
This shows the details of the status change.
If you press on the list, this switches the display to reverse
video, and selects the item. You can also select items in the
error log by turning the knob.
e
Clear button
This deletes the selected error log item from the list.
f
Plural button
When this is on, you can select more than one error log. To
cancel the selection, press once again to return to the
normal display.
Message
To Next Page
Loading...
