Still Image Operations 205
1
Auto store status display
3
Target FM selection buttons
2
Display of available image capacity
4
Pair selection button
7
Frame memory
folder selection
area
Frame memory
selection area
5
Pair button
9
Find button
6
File selection area
8
Direct Recall
button
Frame Memory menu
a
Auto store status display
Depending on the setup settings, this appears when the
auto store function is enabled.
b
Display of available image capacity
This shows the remaining number of frames. When no
more frames can be stored, in pair mode “1” or “0” appears
in red, and in single mode “0” appears in red.
The lower figure shows the remaining number of frames
that can be used as extended clips.
c
Target FM selection buttons
Display of ancillary data
Extended clip display
Status display
Notes
When the signal format is 1080P, each time a still image is
saved the remaining space is reduced by two frames.
Reposition/Lock status display
The border color shows the status as follows:
Blue: selected as the reference channel
Amber: selected, but not the reference channel
Black: not selected
Still/duration display
To Next Page
Loading...
