Sony MVS-8000X SystemMVS-7000X System - Page 239

USO RESTRITO
Video Process 239
Chapter
8
Color
Backgrounds,
Copy
and
Swap,
and
Other
Settings
• Settings for a particular input signal: “Signal input
settings” in Chapter 20 (Volume 2)
• Key fill bus settings: “Video Processing” (page 142)
• Settings for frame memory source buses 1 and 2:
“Setting video processing” (page 208)
• Settings for Aux 1 to 48 buses: “Making video process
settings for an AUX bus” (page 236)
• Overview of video process: “Video Process” (page 238)
This section describes an example on the background A
bus of the M/E-1 bank.
For the background B bus or utility bus 1 or 2, make the
adjustment with a similar procedure.
Making video process settings for each
bus
1 In the menu control block, press the top menu
selection button [M/E 1] and select VF7 ‘Misc’ and
HF2 ‘Video Process.’
2 In the <Bkgd-A> group, press [Video Process],
turning it on.
3 Adjust the following parameters.
Knob
Parameter
Adjustment
Setting values
1
Video
Gain
Video signal
gain
–200.00 to
+200.00
2
Y Gain
Luminance
signal gain
–200.00 to
+200.00
3
C Gain
Chrominance
signal gain
–200.00 to
+200.00
4
Hue Delay
Hue delay
–180.00 to
+180.00
5
Black
Level
Black level
–7.31 to
+109.59
To return the parameter settings to the defaults, press
[Unity] in the <Bkgd-A> group.