Menus Accessed by Pressing a Button Twice
Downstream key control block
a)
• M/E-1, 2, 3, 4, 5 >Key1 >XX
• PGM/PST >DSK1 >XX
• M/E-1, 2, 3, 4, 5 >Key2 >XX
• PGM/PST >DSK2 >XX
• M/E-1, 2, 3, 4, 5 >Key3 >XX
• PGM/PST >DSK3 >XX
• M/E-1, 2, 3, 4, 5 >Key4 >XX
• PGM/PST >DSK4 >XX
• M/E-1, 2, 3, 4, 5 >Key1, 2, 3, 4, 5, 6, 7, 8
>Transition >Wipe Adjust >Pattern Select
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Transition
>Wipe Adjust >Pattern Select
• M/E-1, 2, 3, 4, 5 >Key1, 2, 3, 4, 5, 6, 7, 8
>Transition >Wipe Adjust >Pattern Select
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Transition
>DME Wipe Adjust >Pattern Select
Snapshot >Key Snapshot >XX
a)
The menu recalled depends on which of keyers 1 to 8 the downstream key
control block is delegated to.
b)
Recalling is possible only when the [K-SS] button is On.
Auxiliary bus control block
Frame Memory >Still >Recall
FM1 to 8 signals assigned buttons
Frame Memory >Still >Recall
Color Bkgd1 signal assigned button
Color Bkgd2 signal assigned button
CCR1 signal assigned button
CCR2 signal assigned button
Device control block (trackball or joystick)
DEV1 to DEV12 assigned buttons
• Device >DDR/VTR >Cueup & Play
b)
• Device >DDR/VTR >Timeline
c)
FM1CLIP to FM8CLIP assigned buttons
Frame Memory >Clip >Recall
• M/E-1, 2, 3, 4, 5 >Key1, 2, 3, 4, 5, 6, 7, 8
>Processed Key/Resizer
• PGM/PST >DSK1, 2, 3, 4, 5, 6, 7, 8 >Processed
Key/Resizer
a)
When the three-dimensional transformation operation mode is enabled.
b)
When the [MENU] button is Off.
c)
When the [MENU] button is On.
d)
When the resizer control mode is enabled.
Device control block (search dial)
• Device >DDR/VTR >Cueup & Play
a)
• Device >DDR/VTR >Timeline
b)
FM1CLIP to FM8CLIP assigned buttons
Frame Memory >Clip >Recall
a)
When the [TIMELINE] button is Off. b) When the [TIMELINE] button is On.