Sony MVS-8000X SystemMVS-7000X System - Page 407

USO RESTRITO
Menus Allowing a Return to Default Settings 407
Appendix
(Volume
1)
Knob parameters to which default recall does not apply
Menu number
a)
Menu name
Button name
Knob
Parameter
1116
Transition
[Wipe] in <ON Transition Type>
group
1
5
Transition Rate
Pattern
[Wipe] in <OFF Transition
Type> group
1
5
Transition Rate
Pattern
[Key Blink] and [Edge Blink] in
<Blink> group
1
Blink Rate
[Mix] in <Transition Type> group
1
Transition Type
[Wipe] in <Transition Type>
group
1
5
Transition Rate
Pattern
1116.1
Transition >Wipe
Adjust
[Multi]
3
Invert Type
[H] and [V] in <Pairing> group
1
Width
[H], [V], and [Fringe] in
<Modulation> group
4
Shape
1154
Edge/Direction
[Split] in <Edge> group
1
Split No
1154.1
Edge/Direction
>Matte Adjust
[Mix Color] in <Edge Matte>
group
3
Pattern
[Multi]
3
Invert Type
1155
Main Modify
[H] and [V] in <Pairing> group
1
Width
[H], [V], and [Fringe] in
<Modulation> group
4
Shape
1164
Edge/Direction
[Independent Trans Rate] in
<Pattern Limit Release> group
1
Transition Rate
1171
Transition
[Mix], [Nam], [Super Mix],
[Preset Color Mix], [Wipe],
[DME Wipe], and [FTB] in
<Transition Type> group
1
Transition Rate
a) The menu numbers shown by way of example are those for M/E-1: the
same applies for M/E-2, M/E-3, M/E-4, M/E-5, and P/P. Also, content
applying to Key1 applies equally to Key2 to Key8.
Knob parameters subject to restriction on default recall
Menu number
Menu name
Button name
Knob
Parameter
1111.1
a)
Type >CRK Adjust
[Sample Mark] in the <Auto> group
1
2
Position H
Position V
1112.1
a)
Edge >Matte Adjust
[Position]
1113
a)
Main Mask
[Position]
1116.1
a)
Transition >Wipe
Adjust
[Position]
1116.3
a)
Transition >DME Wipe
Adjust
[Position]
1
2
H
V
1154.1
a)
Edge Direction >Matte
Adjust
[Position]
1
2
Position H
Position V
1155
a)
Main Modify
[Position] in the <Position> group
1155.1
a)
Main Modify >Multi
Adjust
[Position]
1156
a)
Sub Modify
[Position] in the <Position> group
1156.1
a)
Sub Modify >Multi
Adjust
[Position]