Creating and Editing Keyframes
Chapter
13
Keyframe
Effects
Transition start
First transition
completion
point
Transition end
Transition start
First transition
completion
point
Transition end
Effect execution
Image created by interpolation
Background A
Background B
Effect execution
At the first transition completion point, if you move the
image with the positioner, the transition appears as in the
following figure.
First transition
completion
Image created by interpolation
Background A
Background B
Transition start
point
Transition end
At the first transition completion point, if you move the
image with the positioner, the transition appears as in the
following figure.
Effect execution
Transition start
First transition
completion
point
Transition end
Image created by interpolation
Background A
Background B
State before modification
Transition mode “Frame in-out V”
This mode is specified when creating a transition effect in
the vertical direction.
In this mode, in the state at completion of the first
transition, you can move the image with the positioner in
both horizontal and vertical directions. The image at the
transition start point and end point also moves.
The description is of an example of creating an effect such
as the following.
Effect execution
Image created by interpolation
Background A
Background B
State before modification
To Next Page
Loading...
