Sony MVS-8000X SystemMVS-7000X System - Page 90

USO RESTRITO
90
Signal Selection
Chapter
3
Signal
Selection
and
Transitions
• You can assign a key and AUX bus to the key 1 row of
cross-point buttons, and select the signal in the key 2
row.
For details, see “Assigning a Key or AUX Bus to a Button
in the Key 1 or Key 2 Row” in Chapter 19 (Volume 2).
The following table illustrates the correspondence
between buses and cross-point button rows, and the
delegation operations.
Bank
Bus name
Cross-point button row
Delegation operation
M/E-1, M/E-2,
M/E-3, M/E-4
a)
,
M/E-5
a)
Background A bus
b)
Background A row
–
Background B bus
b)
Background B row
–
Key 1 bus
Key 1 row
Turn off the dedicated [SHIFT] button,
then turn off the [KEY3] button.
c)
Key 2 bus
Key 2 row
Turn off the dedicated [SHIFT] button,
then turn off the [KEY4] button.
c)
Key 3 bus
Key 1 row
Turn off the dedicated [SHIFT] button,
then turn on the [KEY3] button.
c)
Key 4 bus
Key 2 row
Turn off the dedicated [SHIFT] button,
then turn on the [KEY4] button.
c)
Key 5 bus
d)
Key 1 row
Turn on the dedicated [SHIFT] button,
then turn off the [KEY3] button.
Key 6 bus
d)
Key 2 row
Turn on the dedicated [SHIFT] button,
then turn off the [KEY4] button.
Key 7 bus
d)
Key 1 row
Turn on the dedicated [SHIFT] button,
then turn on the [KEY3] button.
Key 8 bus
d)
Key 2 row
Turn on the dedicated [SHIFT] button,
then turn on the [KEY4] button.
PGM/PST
Program bus
b)
Program row
–
Preset bus
b)
Preset row
–
DSK 1 bus
DSK 1 row
Turn off the dedicated [SHIFT] button,
then turn off the [DSK3] button.
c)
DSK 2 bus
DSK 2 row
Turn off the dedicated [SHIFT] button,
then turn off the [DSK4] button.
c)
DSK 3 bus
DSK 1 row
Turn off the dedicated [SHIFT] button,
then turn on the [DSK3] button.
c)
DSK 4 bus
DSK 2 row
Turn off the dedicated [SHIFT] button,
then turn on the [DSK4] button.
c)
DSK 5 bus
d)
DSK 1 row
Turn on the dedicated [SHIFT] button,
then turn off the [DSK3] button.
DSK 6 bus
d)
DSK 2 row
Turn on the dedicated [SHIFT] button,
then turn off the [DSK4] button.
DSK 7 bus
d)
DSK 1 row
Turn on the dedicated [SHIFT] button,
then turn on the [DSK3] button.
DSK 8 bus
d)
DSK 2 row
Turn on the dedicated [SHIFT] button,
then turn on the [DSK4] button.
M/E-1, M/E-2,
M/E-3, M/E-4
a)
,
M/E-5
a)
, PGM/
PST
Utility 1 bus
Background A row
When [UTIL] button mode is Hold, hold
down the [UTIL] button.
Utility 2 bus
Background B row
DME external video bus
Key 1 row
Hold down the [UTIL] button.
DME utility 1 bus
Key 2 row
Hold down the [UTIL] button, and press
the [KEY4] button, turning it off.
DME utility 2 bus
Hold down the [UTIL] button, and press
the [KEY4] button, turning it on.