EasyConnect RCT 1.0
Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
G-16
2 A list of all networked HFA II-
i
instruments will be displayed (Figure G.16). The first instrument is
selected by default. Select the source instrumen
t you want to copy from by clicking on it and
then select
NEXT to continue.
Figure G.16 Select the Source Networked HFA Instrument to Copy
Note: The name of the HFA II-
i
instrument can be created on the instrument in the HFA Network
Setup Screen. Creating a name for an instrument can allow you to know the location of the
instrument. If you do not create a name, then the Name field in the instrument list will be empty
(see “Enable the RCT and Name HFA II-i Instruments,” on page G-3).
To Next Page
Loading...
