Dolby Laboratories IMS2000 - Page 126

110 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
The actions available include the following:
•
Projector:
o
Dowser: Open or close the selected projector dowser.
o
Lamp: Power on or off the selected projector lamp.
o
Projector Channel Switch: Switch the selected projector channel.
o
Macro: Execute the macro defined in the selected projector.
•
Input/Output:
o
General Purpose Output: Configure a GPO line.
o
Send Message: Send a message to the connected device.
•
Playback:
o
Audio Volume: Control the audio volume output.
o
Audio Mute: Mute the audio
o
Playback Actions: Change the playback state.
o
Video Output Actions: Change the default video output format.
o
Sensio3D: Enable or disable the Sensio3D output format.
o
RealD SBS: Enable or disable the RealD SBS output format.
•
Macro Control:
o Delay: Insert a delay between actions.
o Purge Pending Macro: Purge the current macro execution stack.
•
Library:
o Offers control using
Certainty, eCNA, JNior, JNior Expansion Module, and
more.
• System:
o
Binary Execution: Execute a binary command
o
System Shutdown: Allows you to shut down the player.
6. Click on the
Save button to save the settings, or click on the Cancel to stop adding an
action.