Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3 15
Chapt er 5 Installing and Marrying an IMS2000
with an NEC Series 2 Projector
Before you begin to install the IMS2000 into your NEC Series 2 projector, be sure that:
• The projector is powered down and in the off position.
• The power cord is disconnected from the wall.
• You always follow electrostatic discharge procedures. For more information see
Chapter 2.
5.1 Preparing for the Installation
You must prepare the projector prior to installing the IMS2000 unit, as described in this
chapter.
Figure 5-1 NEC Projector
To Next Page
Loading...