Dolby Laboratories IMS2000 - Show Playlist Removal; Playback Recovery Due to Power Failure

210 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
14.8.4 Show Playlist Removal
You can remove a show playlist from the schedule:
1. Select the
CineLister Schedule tab.
2. Click on the show playlist to remove it in the
Schedule window.
3. Click on the
Delete button.
The appropriate password will be needed for the password authentication window
that will pop up. superuser privileges are necessary to confirm the changes. If you
are already logged in with superuser privileges, the password confirmation window
will not appear.
4. Click on the
Delete button to delete the playlist.
14.8.5 Playback Recovery Due to Power Failure
If a power failure occurs during a scheduled playback, then playback recovery will be
possible after having powered the unit back on.
How to Recover Playback
To recover playback after an unexpected failure occurs, login with the proper
credentials.
Note:
After logging in, CineLister will resume playback at the default amount of
180 seconds prior to power failure. This amount will be different if the
settings have been changed by you.
Shutting Down During Playback
When there is a playback in progress and you try to shut down the server, you will be
prompted to a confirmation window. If you select yes, the server will shut down in five
seconds and playback will stop.
Note:
Playback will resume when the unit is turned back on.