Dolby Laboratories IMS2000 - Rebuild Progress; Managing a Drive

258 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
16.1 Rebuild Progress
The Storage tab enables you to view the rebuild progress in Storage Details after you
replace and insert a new disk.
Note:
When the server is rebuilding a RAID, an orange icon appears to indicate
that the RAID is being rebuilt.
Figure 16-2 Rebuild Status
16.1.1 Managing a Drive
Support for this feature is forthcoming. Presently, the only way to disable a drive is to
physically remove it from the RAID.
Rebuild progress
Reset all
drives button