Dolby Laboratories IMS2000 - Adding a Video Output Action; Adding a Dowser Action

112 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
13.5.6 Adding a Video Output Action
To add a video output action:
1. Highlight the macro cue.
2. Select the
Video Output Actions option, which is located in the playback section in the
Select an Action to Insert drop-down menu.
3. Click on the
Insert button.
The following window appears.
Figure 13-33 Video Output Setup Window
13.5.7 Adding a Dowser Action
To add a dowser action:
1. Highlight the macro cue.
2. Select the
Dowser Action option, which is located in the projector section in the Select
an Action to Insert
drop-down menu.
3. Click on the
Insert button.
The following window appears.
Figure 13-34 Add a New Action Window (Dowser)