26 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
5.7 Accessing the GUI
To access the IMS2000 graphical user interface (GUI), launch your browser on the
connected computer and enter the IP address in the address bar.
The Dolby IMS2000 login screen appears.
Enter the following information:
• User name: doremi
• Password: doremi
Then click on the Login button.
5.8 Configuring the Projector
For the projector to communicate with the IMS2000:, configure it in the Device Manager.
To configure the projector:
1. While the projector is booting up, click
Administration > Device Manager.
2. Click the
New button.
Figure 5-23 Device Manager
To Next Page
Loading...
