42 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 2
For more information, refer to the projector manufacturer manual for proper power-
up sequence.
Figure 6-15 Power Switch
6.7 Accessing the GUI
To access the IMS2000 GUI, launch your browser on the connected computer and enter
the IP address into the browser window.
The Dolby IMS2000 Login screen appears:
1. Enter the user name: doremi
2. Enter the password: doremi
3. Click the Login button.
6.8 Marriage
Marriage on the Barco projector occurs directly on the projector. After marriage is
complete, the Barco projector is automatically detected in the
Device Manager.
Once the projector has finished booting up, the taillights at the back of the projector
illuminate in red, indicating that the board and the projector are not married. If there is a
touch screen attached to the projector, two tamper errors appears, indicating that the
marriage has not occurred.
To Next Page
Loading...
