Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3 45
Chapt er 7 Installing and Marrying an IMS2000
with a Christie Series 2 Projector
Before you begin to install the IMS2000 into your projector, be sure that:
• The projector is powered down and in the off position.
• Disconnect the AC power cord from the wall.
• Remember to always follow electrostatic discharge procedures.
7.1 Preparation
You must prepare the projector prior to installing the IMS2000 unit, as described in this
chapter.
Figure 7-1 Christie Projector
To Next Page
Loading...