Dolby Laboratories IMS2000 - Macro Saving

116 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
Editing Actions
You can edit an action of any given macro automation cue by highlighting it in the Macro
Actions
window.
To edit the action:
1. Click on the
Properties icon that appears on the right.
2. Edit the properties, and set the action when added to the macro automation cue.
3. Click on the
Save button to save the settings.
Action and Macro Removal
You can remove an action or macro highlighting it in the Macro Actions wi ndow.
To remove an action from the list of actions associated with a macro automation cue:
1. Select the action in the
Macro Actions window.
2. Click the
X that appears on the right.
To delete a macro:
3. Select the macro on the left side of the GUI.
4. Click on the
Delete button.
13.5.12 Macro Saving
You can save a macro by highlighting it in the Macro Actions window.
1. Repeat the macro creation operations for all the macro automation cues, and click the
Save button.
2. You will be asked to enter a password to perform the operation.
3. Enter the appropriate password, and click on the
Ok button.
superuser privileges are necessary in order to be able to save changes. If you are
already logged in as a superuser, the
Password window will not appear. Selecting the
Revert button will close a document without saving the changes.
4. The macro automation cues will be available in CineLister to create a show playlist.
Note:
The saving operation will not only save the macro automation cues, but
also the trigger cues that were created.