Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3 v
Safety Precautions
WARNING
THIS DEVICE MUST BE GROUNDED
IMPORTANT
Power requirements for electrical equipment vary from area to area. Please ensure that the IMS2000
meets the power requirements in the surrounding area. If in doubt, consult a qualified electrician or a
Dolby Laboratories Inc. dealer.
IMS2000 Power Ratings
The IMS2000 Maximum Power Consumption is up to 53W in playback 400Mbps with three
external USB devices attached that can draw 5V/0.5A from the IMS2000 USB ports.
WARNING: Multiple sources of supply; disconnect all sources before servicing.
IMS2000 Rack Mount and Thermal Information
• Maximum operating ambient temperature is 40°C.
• Never restrict the air flow through the devices’ fan or vents.
Protecting Yourself and the IMS2000
Never touch the AC plug with wet hands. Always disconnect the projector from the power supply by
pulling on the plug, not the cord. Allow only a Dolby Laboratories Inc. dealer or qualified professional
engineer to repair or reassemble the IMS2000. Apart from voiding the warranty, unauthorized engineers
may touch live internal parts and receive a serious electric shock. Do not put or allow anyone to put any
object, especially metal objects, into the IMS2000. Use only a listed AC power supply. Never use a DC
power supply.
If water or any other liquid is spilled into or onto the IMS2000, disconnect the power and call a Dolby
Laboratories Inc. dealer. The unit must be well ventilated and away from direct sunlight. To avoid
damage to internal circuitry, as well as the external finish, keep the IMS2000 away from direct sources of
heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the IMS2000. They can
damage the surface area and may ignite. Do not use denatured alcohol, paint thinner or similar chemicals
to clean the IMS2000. This can damage the unit.
To Next Page
Loading...
