148 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
Figure 13-82 CPL Created
The MPEG streamer format is dynamically handled. This means that the
4:2:2 vs 4:2:0 parameter is automatically detected from the MPEG stream
itself. There is no need to provide this information to the playback engine.
6. Repeat the steps 1–5 as many times as necessary to generate another live CPL.
To view the properties of the CPL:
1. Highlight the CPL.
2. Click on the
Properties button on the right-hand side.
This information is the same information provided in the
Content Manager
Composition Playlist
tab. See Section 13.10.2 for more detailed information.
Figure 13-83 CPL Properties
To Next Page
Loading...
