156 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
Figure 13-92 Backup Generation Window
5. Click on the Close button to exit out of the Backup Generation window.
To view the backup, select the
Restore Backup tab.
6. The manual backup process is now complete.
Manual Backup to External Drive
You can back up the configuration files manually, to an external drive (for example,
eSATA or USB).
To perform the operation:
1. Insert an external storage device into the unit.
For this example, a USB flash drive will be used.
2. Click on
Generate Backup tab.
3. Click on the Generate button.
4. Select the USB from the drop-down menu.
5. Click on the
Ok button.
The backup process will now begin.
Figure 13-93 Select Location of Backup File (USB)
6. The Backup Generation window appears.
This will indicate that the backup process was a success.
To Next Page
Loading...
