Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3 173
Ingest from an NAS Device
The attached NAS device should ingest to only one unit at a time to ensure the
performance of the devices are not hindered. To perform the operation:
1. Go to
Control > Ingest Manager > Ingest Scan.
2. Select the NAS source from the drop-down menu.
3. Select the content to ingest to the local storage.
Figure 13-119 Selecting NAS Source
4. Move the cursor over the Ingest button, and select the Local (default) destination.
The ingested content will be available on the local storage when the process is
completed. You will be able to view the progress of the content being ingested in the
Ingest Monitor window.
To Next Page
Loading...
