242 Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3
The following information is required to configure the device manually:
•
Device Name: We recommend that you use a relevant name.
•
Device Type: Click on the arrow for the list of supported devices.
•
IP Address: IP address of the device to control.
•
Port: This information is automatically populated after choosing the device type.
• IMB port number: 43751.
ETH-1
ETH-2
are set to DHCP by default. All IMS2000
boards are shipped from the factory with the following default IP address
for ETH-0:
• IP: 192.168.100.50
• SM: 255.255.255.0
• GW: Blank
To Next Page
Loading...
