Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3 271
• IP: 42.0.0.1
• Mask: 255.255.255.248
• Gateway: 42.0.0.6
For DHCP, use the following format:
• Interface: eth0
• IP: dhcp
5. Create a file, and name it
ntp (optional) with the following format. Replace items in
bold with your settings.
NTPSERVERS="server1.ntp.org server2.ntp.org"
6. Create a file, and name it dns (required for NTP) with the following format. Replace
items in bold with your settings.
• Name server: 172.17.16.1
• Name server: 8.8.8.8
• Search: rnd.doremilabs.fr
• Domain: rnd.doremilabs.fr
When creating these configuration files, make sure that the files do not
have any extensions (for example, .txt, .doc), which are the default for some
operating systems.
7. Place all files that were created into
/doremi/tmp/network/.
8. Plug your USB flash drive on the IMS2000, and wait for two minutes.
9. Unplug the flash drive, and reboot.
The files on USB flash drives are never moved or changed by the IMS2000.
To Next Page
Loading...
