Dolby
®
IMS2000 Installation and User’s Manual
IMS.OM.004730.DRM Issue 3 47
2. Remove the IMS2000 from its carton and antistatic bag.
3. Insert the IMS2000 board into the projector media block slot guide rails on the inside
of the slot.
The latches must be out and open for the IMS2000 to fit properly.
4. To open the latches, press the red button.
Figure 7-4 Red Button on Latch
5. Close the two latches to secure the board.
Figure 7-5 IMS2000 Installation
latches
To Next Page
Loading...
