C
HAPTER
4
| Basic Management Tasks
Displaying System Information
– 102 –
PARAMETERS
These parameters are displayed in the web interface:
◆ System Description – Brief description of device type.
◆ System Object ID – MIB II object ID for switch’s network
management subsystem.
◆ System Up Time – Length of time the management agent has been
up.
◆ System Name – Name assigned to the switch system.
◆ System Location – Specifies the system location.
◆ System Contact – Administrator responsible for the system.
WEB INTERFACE
To configure general system information:
1. Click System, General.
2. Specify the system name, location, and contact information for the
system administrator.
3. Click Apply.
Figure 3: System Information
N
OTE
:
This page also
includes a Telnet button that allows access to the
Command Line Interface via Telnet
.
To Next Page
Loading...
