C
HAPTER
25
| SNMP Commands
– 643 –
show snmp user This command shows information on SNMP users.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show snmp user
EngineId: 800000ca030030f1df9ca00000
User Name: steve
Authentication Protocol: md5
Privacy Protocol: des56
Storage Type: nonvolatile
Row Status: active
SNMP remote user
EngineId: 80000000030004e2b316c54321
User Name: mark
Authentication Protocol: mdt
Privacy Protocol: des56
Storage Type: nonvolatile
Row Status: active
Console#
Notify View The associated notify view.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
Table 48: show snmp group - display description (Continued)
Field Description
Table 49: show snmp user - display description
Field Description
EngineId String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Authentication Protocol The authentication protocol used with SNMPv3.
Privacy Protocol The privacy protocol used with SNMPv3.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
SNMP remote user A user associated with an SNMP engine on a remote device.
To Next Page
Loading...
Need help?
General
