C
HAPTER
14
| Basic Administration Protocols
Link Layer Discovery Protocol
– 347 –
Figure 189: Displaying Local Device Information for LLDP (General)
Figure 190: Displaying Local Device Information for LLDP (Port)
DISPLAYING LLDP
REMOTE PORT
INFORMATION
Use the Administration > LLDP (Show Remote Device Information) page to
display information about devices connected directly to the switch’s ports
which are advertising information through LLDP, or to display detailed
information about an LLDP-enabled device connected to a specific port on
the local switch.
CLI REFERENCES
◆ "show lldp info remote-device" on page 965
PARAMETERS
These parameters are displayed in the web interface:
Port
◆ Local Port – The local port to which a remote LLDP-capable device is
attached.
◆ Chassis ID – An octet string indicating the specific identifier for the
particular chassis in this system.
To Next Page
Loading...
