C
HAPTER
24
| System Management Commands
Frame Size
– 592 –
show version This command displays hardware and software version information for the
system.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
See "Displaying Switch Hardware/Software Versions" on page 103 for
detailed information on the items displayed by this command.
EXAMPLE
Console#show version
Unit 1
Serial Number : 004000330
Hardware Version : R0A
EPLD Version : 1.00
Number of Ports : 24
Main Power Status : Up
Redundant Power Status : Not present
Role : Master
Loader Version : 0.0.1.1
Linux Kernel Version : 2.6.19.2-0.1
Boot ROM Version : 0.0.0.1
Operation Code Version : 1.1.1.3
Console#
FRAME SIZE
This section describes commands used to configure the Ethernet frame size
on the switch.
jumbo frame This command enables support for jumbo frames for Gigabit Ethernet
ports. Use the no form to disable it.
SYNTAX
[no] jumbo frame
DEFAULT SETTING
Disabled
COMMAND MODE
Global Configuration
Table 35: Frame Size Commands
Command Function Mode
jumbo frame Enables support for jumbo frames GC
To Next Page
Loading...
Need help?
General
