C
HAPTER
40
| LLDP Commands
– 964 –
Eth 1/5 | Tx-Rx True
.
.
.
Console#show lldp config detail ethernet 1/1
LLDP Port Configuration Detail
Port : Eth 1/1
Admin Status : Tx-Rx
Notification Enabled : True
Basic TLVs Advertised:
port-description
system-name
system-description
system-capabilities
management-ip-address
802.1 specific TLVs Advertised:
*port-vid
*vlan-name
*proto-vlan
*proto-ident
802.3 specific TLVs Advertised:
*mac-phy
*poe
*link-agg
*max-frame
Console#
show lldp info local-
device
This command shows LLDP global and interface-specific configuration
settings for this device.
SYNTAX
show lldp info local-device [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show lldp info local-device
LLDP Local System Information
Chassis Type : MAC Address
Chassis ID : 00-01-02-03-04-05
System Name :
System Description : ECS4610-50T/ECS4610-26T
System Capabilities Support : Bridge
System Capabilities Enable : Bridge
To Next Page
Loading...
Need help?
General
