C
HAPTER
29
| Access Control Lists
IPv6 ACLs
– 758 –
EXAMPLE
This example accepts any incoming packets if the destination address is
2009:DB9:2229::79/8.
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/8
Console(config-ext-ipv6-acl)#
This allows packets to any destination address when the DSCP value is 5.
Console(config-ext-ipv6-acl)#permit any dscp 5
Console(config-ext-ipv6-acl)#
This allows any packets sent to the destination 2009:DB9:2229::79/48
when the flow label is 43.”
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/48 flow-label 43
Console(config-ext-ipv6-acl)#
RELATED COMMANDS
access-list ipv6 (754)
Time Range (625)
show ipv6 access-
list
This command displays the rules for configured IPv6 ACLs.
SYNTAX
show ipv6 access-list {standard | extended} [acl-name]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ipv6 access-list standard
IPv6 standard access-list david:
permit host 2009:DB9:2229::79
permit 2009:DB9:2229:5::/64
Console#
RELATED COMMANDS
permit, deny (Standard IPv6 ACL) (755)
permit, deny (Extended IPv6 ACL) (756)
ipv6 access-group (759)
To Next Page
Loading...
Need help?
General
