EasyManuals Logo

Edge-Core ECS4610-24F User Manual

Edge-Core ECS4610-24F
1154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #737 background imageLoading...
Page #737 background image
C
HAPTER
28
| General Security Measures
IP Source Guard
– 737 –
COMMAND USAGE
â—† This command sets the maximum number of address entries that can
be mapped to an interface in the binding table, including both dynamic
entries discovered by DHCP snooping and static entries set by the ip
source-guard command.
EXAMPLE
This example sets the maximum number of allowed entries in the binding
table for port 5 to one entry.
Console(config)#interface ethernet 1/5
Console(config-if)#ip source-guard max-binding 1
Console(config-if)#
show ip source-
guard
This command shows whether source guard is enabled or disabled on each
interface.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show ip source-guard
Interface Filter-type Max-binding
--------- ----------- -----------
Eth 1/1 DISABLED 5
Eth 1/2 DISABLED 5
Eth 1/3 DISABLED 5
Eth 1/4 DISABLED 5
Eth 1/5 SIP 1
Eth 1/6 DISABLED 5
.
.
.
show ip source-
guard binding
This command shows the source guard binding table.
SYNTAX
show ip source-guard binding [dhcp-snooping | static]
dhcp-snooping - Shows dynamic entries configured with DHCP
Snooping commands (see page 724)
static - Shows static entries configured with the ip source-guard
binding command (see page 733).
COMMAND MODE
Privileged Exec

Table of Contents

Other manuals for Edge-Core ECS4610-24F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Edge-Core ECS4610-24F and is the answer not in the manual?

Edge-Core ECS4610-24F Specifications

General IconGeneral
BrandEdge-Core
ModelECS4610-24F
CategoryNetwork Router
LanguageEnglish

Related product manuals