C
HAPTER
30
| Interface Commands
– 780 –
===== Port Utilization =====
35 Octets Input per seconds
0 Packets Input per seconds
0.00 % Input Utilization
56 Octets Output per seconds
0 Packets Output per second
0.00 % Output Utilization
Console#
show interfaces
status
This command displays the status for an interface.
SYNTAX
show interfaces status [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
vlan vlan-id (Range: 1-4093)
DEFAULT SETTING
Shows the status for all interfaces.
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Displaying
Connection Status" on page 128.
EXAMPLE
Console#show interfaces status ethernet 1/1
Basic Information:
Port Type : 1000T
Mac Address : 00-00-E8-93-82-A1
Configuration:
Name :
Port Admin : Up
Speed-duplex : Auto
Capabilities : 10half, 10full, 100half, 100full, 1000full
Broadcast Storm : Enabled
Broadcast Storm Limit : 500 packets/second
Flow Control : Disabled
VLAN Trunking : Disabled
LACP : Disabled
Mac-Learning : Yes
Port Security : Disabled
Max MAC Count : 0
Port Security Action : None
Media Type : SFP preferred auto
To Next Page
Loading...
Need help?
General
