C
HAPTER
37
| Class of Service Commands
Priority Commands (Layer 3 and 4)
– 883 –
show map ip dscp This command shows the IP DSCP priority map.
SYNTAX
show map ip dscp [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show map ip dscp ethernet 1/1
DSCP mapping status: Disabled
Port DSCP CoS
--------- ---- ---
Eth 1/ 1 0 0
Eth 1/ 1 1 0
Eth 1/ 1 2 0
Eth 1/ 1 3 0
.
.
.
Eth 1/ 1 61 0
Eth 1/ 1 62 0
Eth 1/ 1 63 0
Console#
show map ip port This command shows the IP port priority map.
SYNTAX
show map ip port [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
COMMAND MODE
Privileged Exec
To Next Page
Loading...
