C
HAPTER
4
| Basic Management Tasks
Displaying Switch Hardware/Software Versions
– 103 –
DISPLAYING SWITCH HARDWARE/SOFTWARE VERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI REFERENCES
â—† "System Management Commands" on page 587
PARAMETERS
The following parameters are displayed in the web interface:
Main Board Information
◆ Serial Number – The serial number of the switch.
◆ Number of Ports – Number of built-in ports.
◆ Hardware Version – Hardware version of the main board.
◆ Internal Power Status – Displays the status of the internal power
supply.
Management Software Information
◆ Role – Shows that this switch is operating as Master or Slave.
◆ EPLD Version – Version number of EEPROM Programmable Logic
Device.
◆ Loader Version – Version number of loader code.
◆ Diagnostics Code Version – Version of Power-On Self-Test (POST)
and boot code.
◆ Operation Code Version – Version number of runtime code.
WEB INTERFACE
To view hardware and software version information.
1. Click System, then Switch.
To Next Page
Loading...
Need help?
General
