C
HAPTER
42
| DHCP Commands
DHCP Server
– 990 –
EXAMPLE
The following example leases an address to clients using this pool for 7
days.
Console(config-dhcp)#lease 7
Console(config-dhcp)#
netbios-name-
server
This command configures NetBIOS Windows Internet Naming Service
(WINS) name servers that are available to Microsoft DHCP clients. Use the
no form to remove the NetBIOS name server list.
SYNTAX
netbios-name-server address1 [address2]
no netbios-name-server
address1 - Specifies IP address of primary NetBIOS WINS name
server.
address2 - Specifies IP address of alternate NetBIOS WINS name
server.
DEFAULT SETTING
None
COMMAND MODE
DHCP Pool Configuration
USAGE GUIDELINES
Servers are listed in order of preference (starting with address1 as the
most preferred server).
EXAMPLE
Console(config-dhcp)#netbios-name-server 10.1.0.33 10.1.0.34
Console(config-dhcp)#
RELATED COMMANDS
netbios-node-type (991)
To Next Page
Loading...
Need help?
General
