C
HAPTER
46
| Multicast Routing Commands
PIM Multicast Routing
– 1110 –
Lan Prune Delay : Disabled
Propagation Delay : 500 ms
Override Interval : 2500 ms
DR Priority : 20
Join/Prune Interval : 80 sec
Console#
clear ip pim bsr rp-
set
This command clears multicast group to RP mapping entries learned
through the PIMv2 bootstrap router (BSR).
COMMAND MODE
Privileged Exec
COMMAND USAGE
◆ This command can be used to update entries in the static multicast
forwarding table immediately after making configuration changes to the
RP.
◆ Use the show ip pim rp mapping command to display active RPs that
are cached with associated multicast groups.
EXAMPLE
This example clears the RP map.
Console#clear ip pim bsr rp-set
Console#show ip pim rp mapping
PIM Group-to-RP Mappings
Console#
show ip pim bsr-
router
This command displays information about the bootstrap router (BSR).
COMMAND MODE
Privileged Exec
COMMAND USAGE
This command displays information about the elected BSR.
EXAMPLE
This example displays information about the BSR.
Console#show ip pim bsr-router
PIMv2 Bootstrap information
BSR address : 192.168.0.2/32
Uptime : 01:01:23
BSR Priority : 200
Hash mask length : 20
Expire : 00:00:42
Role : Candidate BSR
To Next Page
Loading...
