To Next Page

To Previous Page

HAPTER

| Authentication Commands

TACACS+ Client

– 667 –

tacacs-server This command specifies the TACACS+ server and other optional

parameters. Use the no form to remove the server, or to restore the

default values.

SYNTAX

tacacs-server index host host-ip-address [key key]

[port port-number]

no tacacs-server index

index - The index for this server. (Range: 1)

host-ip-address - IP address of a TACACS+ server.

key - Encryption key used to authenticate logon access for the

client. Do not use blank spaces in the string. (Maximum length: 48

characters)

port-number - TACACS+ server TCP port used for authentication

messages. (Range: 1-65535)

DEFAULT SETTING

10.11.12.13

COMMAND MODE

Global Configuration

EXAMPLE

Console(config)#tacacs-server host 192.168.1.25

Console(config)#

tacacs-server host This command specifies the TACACS+ server. Use the no form to restore

the default.

SYNTAX

tacacs-server host host-ip-address

no tacacs-server host