C
HAPTER
30
| Interface Commands
– 779 –
COMMAND MODE
Normal Exec, Privileged Exec
COMMAND USAGE
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see "Showing Port or
Trunk Statistics" on page 131.
EXAMPLE
Console#show interfaces counters ethernet 1/17
Ethernet 1/ 1
===== IF table Stats =====
138550 Octets Input
820500 Octets Output
734 Unicast Input
932 Unicast Output
12 Discard Input
0 Discard Output
0 Error Input
0 Error Output
0 Unknown Protos Input
0 QLen Output
===== Extended Iftable Stats =====
38 Multi-cast Input
1342 Multi-cast Output
210 Broadcast Input
2 Broadcast Output
===== Ether-like Stats =====
0 Alignment Errors
0 FCS Errors
0 Single Collision Frames
0 Multiple Collision Frames
0 SQE Test Errors
0 Deferred Transmissions
0 Late Collisions
0 Excessive Collisions
0 Internal Mac Transmit Errors
0 Internal Mac Receive Errors
0 Frames Too Long
0 Carrier Sense Errors
0 Symbol Errors
===== RMON Stats =====
0 Drop Events
959114 Octets
3259 Packets
212 Broadcast PKTS
1381 Multi-cast PKTS
0 Undersize PKTS
0 Oversize PKTS
0 Fragments
0 Jabbers
0 CRC Align Errors
0 Collisions
2142 Packet Size <= 64 Octets
303 Packet Size 65 to 127 Octets
140 Packet Size 128 to 255 Octets
75 Packet Size 256 to 511 Octets
140 Packet Size 512 to 1023 Octets
459 Packet Size 1024 to 1518 Octets
To Next Page
Loading...
Need help?
General
