C
HAPTER
14
| Basic Administration Protocols
Simple Network Management Protocol
– 375 –
â–
AuthNoPriv – SNMP communications use authentication, but the
data is not encrypted.
â–
AuthPriv – SNMP communications use both authentication and
encryption.
WEB INTERFACE
To configure trap managers:
1. Click Administration, SNMP.
2. Select Configure Trap from the Step list.
3. Select Add from the Action list.
4. Fill in the required parameters based on the selected SNMP version.
5. Click Apply
Figure 211: Configuring Trap Managers (SNMPv1)
Figure 212: Configuring Trap Managers (SNMPv2c)
To Next Page
Loading...
Need help?
General
