C
HAPTER
15
| Multicast Filtering
Layer 2 IGMP (Snooping and Query)
– 394 –
This attribute configures the IGMP report/query version used by IGMP
snooping. Versions 1 - 3 are all supported, and versions 2 and 3 are
backward compatible, so the switch can operate with other devices,
regardless of the snooping version employed.
◆ Querier Status – When enabled, the switch can serve as the Querier,
which is responsible for asking hosts if they want to receive multicast
traffic. This feature is not supported for IGMPv3 snooping.
(Default: Disabled)
WEB INTERFACE
To configure general settings for IGMP Snooping and Query:
1. Click Multicast, IGMP Snooping, General.
2. Adjust the IGMP settings as required.
3. Click Apply.
Figure 227: Configuring General Settings for IGMP Snooping
To Next Page
Loading...
