C
HAPTER
15
| Multicast Filtering
Layer 3 IGMP (Query used with Multicast Routing)
– 417 –
◆ Static Group Address – An IP multicast group address. (The group
addresses specified cannot be in the range of 224.0.0.1 -
239.255.255.255.)
◆ Source Address – The source address of a multicast server
transmitting traffic to the specified multicast group address.
WEB INTERFACE
To configure static IGMP groups:
1. Click Multicast, IGMP, Static Group.
2. Select Add from the Action list.
3. Select a VLAN interface to be assigned as a static multicast group
member, and then specify the multicast group. If source-specific
multicasting is supported by the next hop router in the reverse path
tree for the specified multicast group, then the source address should
also be specified.
4. Click Apply.
Figure 246: Configuring Static IGMP Groups
To display configured static IGMP groups:
1. Click Multicast, IGMP, Static Group.
2. Select Show from the Action list.
3. Click Apply.
Figure 247: Showing Static IGMP Groups
To Next Page
Loading...
Need help?
General
