C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 90 –
Configure Host Key 279
Generate Generates the host key pair (public and private) 279
Show Displays RSA and DSA host keys; deletes host keys 279
Configure User Key 281
Copy Imports user public keys from TFTP server 281
Show Displays RSA and DSA user keys; deletes user keys 281
ACL Access Control Lists 283
Configure Time Range Confiures the time to apply an ACL 284
Add Specifies the name of a time range 284
Show Shows the name of configured time ranges 284
Add Rule 284
Absolute Sets exact time or time range 284
Periodic Sets a recurrent time 284
Show Rule Shows the time specified by a rule 284
Configure ACL 286
Add Adds an ACL based on IP or MAC addres filtering 286
Show Shows the name and type of configured ACLs 286
Add Rule Configures packet filtering based on IP or MAC addresses and other
packet attributes
286
Show Rule Shows the rules specified for an ACL 286
Configure Interface Binds a port to the specified ACL and time range 300
ARP Inspection 301
Configure General Enables inspection globally, configures validation of additional
address components, and sets the log rate for packet inspection
302
Configure VLAN Enables ARP inspection on specified VLANs 304
Configure Interface Sets the trust mode for ports, and sets the rate
limit for packet inspection
306
Show Information
Show Statistics Displays statistics on the inspection process 307
Show Log Shows the inspection log list 308
IP Filter 309
Add Sets IP addresses of clients allowed management access via the
web, SNMP, and Telnet
309
Show Shows the addresses to be allowed management access 309
Port Security Configures per port security, including status, response for security
breach, and maximum allowed MAC addresses
311
Port Authentication IEEE 802.1X 313
Configure Global Enables authentication and EAPOL pass-through 314
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General
