4 - 83
Chapter 4 Disassembly / Assembly and Adjustments
When carrying out the work described next procedure, take care not to drop and
lose the SPRING REGI OUT (PL3.2.7).
25) Release the hook of the ACTUATOR
REGI OUT (PL3.2.6), shift the
ACTUATOR REGI ROLL M
(PL3.2.8) to right side.
26) Release the ACTUATOR REGI OUT
from the hook on the CHUTE UP
(PL3.2.26), open the ACTUATOR
REGI OUT.
27) Remove the E-ring that fixes the
GEAR REGI R (PL3.2.22) to the
ROLL ASSY REGI (PL3.2.9), using
a miniature screwdriver.
To Next Page
Loading...
