4 - 84
Chapter 4 Disassembly / Assembly and Adjustments
28) Remove the GEAR REGI R from the
ROLL ASSY REGI.
When carrying out the work
this procedure, it is easier to
push the ROLL REGI METAL
(PL3.2.10) to frontward.
29) Remove the BEARING EARTH
REGI (PL3.2.21) from the ROLL
ASSY REGI.
When carrying out the work
this procedure, it is easier to
push the ROLL REGI METAL
(PL3.2.10) to frontward.
30) Remove the E-ring that fixes the
BEARING R (PL3.2.31) to the ROLL
ASSY REGI, using a miniature
screwdriver.
To Next Page
Loading...
