Fuji Xerox DocuPrint CM305 df - Panel Lock Function

4 - 85
Chapter 4 Disassembly / Assembly and Adjustments
31) Remove the BEARING R from the
ROLL ASSY REGI.
NOTE
When carrying out the work
this procedure, it is easier to
push the ROLL REGI
METAL (PL3.2.10) to
frontward.
32) Shift the ROLL ASSY REGI to left
to remove the right shaft of the
ROLL ASSY REGI, remove the
ROLL ASSY REGI from the
FEEDER ASSY MG AIO (PL3.1.98)
together with the ACTUATOR REGI
OUT and the ACTUATOR REGI
ROLL M.
NOTE
When carrying out the work
this procedure, move the
ACTUATOR REGI OUT to
right until it stops.