4 - 99
Chapter 4 Disassembly / Assembly and Adjustments
When carrying out the work described next procedure, take care not to drop and
lose the SPRING REGI OUT (PL3.2.7).
26) Release the ACTUATOR REGI OUT
from the hook on the CHUTE UP
(PL3.2.26), open the ACTUATOR
REGI OUT.
27) Release the three hooks that fix the
SENSOR PHOTO: REGI (PL3.2.13)
to the FEEDER ASSY MG AIO
(PL3.1.98), and remove the SEN-
SOR PHOTO: REGI.
When carrying out the work
this procedure, it is easier to
push the ACTUATOR.
28) Disengage the connector (P/J232) of
the SENSOR PHOTO: REGI.
To Next Page
Loading...
