4 - 100
Chapter 4 Disassembly / Assembly and Adjustments
[Replacement]
1) Engage the connector (P/J232) of the
SENSOR PHOTO: REGI.
2) Replace the SENSOR PHOTO:
REGI to the FEEDER ASSY MG
AIO by mating the three hooks of
the SENSOR PHOTO: REGI.
When carrying out the work
this procedure, it is easier
to push the ACTUATOR
REGI IN (PL3.2.11) to
downward.
3) Close the ACTUATOR REGI OUT
by inserting the boss of the ACTUA-
TOR REGI OUT into the SPRING
REGI OUT.
To Next Page
Loading...
