4 - 180
Chapter 4 Disassembly / Assembly and Adjustments
When carrying out the work described next procedure, keep the TRANSFER
ASSY slightly lifted for ease of work.
3) Attach the GEAR T4 to the printer,
align the holes of the GEAR T4, the
printer frame, and the TRANSFER
ASSY, and then insert the PIVOT
TRANS L.
When carrying out the work
described next procedure,
ensure that the flat face of
the PIVOT TRANS L is
oriented to the direction
shown in the right.
4) Mate the tab of the STOPPER
PIVOT with the notch of the DRIVE
ASSY MAIN, attach the STOPPER
PIVOT to the PIVOT TRANS L.
To Next Page
Loading...
