4 - 181
Chapter 4 Disassembly / Assembly and Adjustments
5) Rotate the STOPPER PIVOT to the
left, secure the STOPPER PIVOT to
the DRIVE ASSY MAIN frame.
6) Mate the notch of the CLUTCH
ASSY DRV with the rib of the
DRIVE ASSY PH, secure the
CLUTCH ASSY DRV to the ROLL
ASSY REGI with the E-ring by
using a pliers.
7) Route the harness of the CLUTCH
ASSY DRV through the hook of the
DRIVE ASSY PH.
To Next Page
Loading...
